Home > Accessories >

Low Profile Bowen Speed Ring Insert 144mm (5 11/16")
Low Profile Bowen Speed Ring Insert 144mm (5 11/16")


 
Alternative Views:


Regular Price: $32.00
Sale Price: $28.95
You Save: $3.05

Stock Status:In stock

Product Code: SRI144-BLP
Qty:

Description
 
This ring does not work with Godox AD-B2
Low Profile Bowen: This insert is designed specifically for the Godox AD-600B, AD600BM, AD600Pro and AD400Pro (also sold as the Cheetah CL-600X, Flashpoint XPLOR 600 HSS, XPLOR 600 HSS TLL, XPLOR 600Pro, XPLOR 400 Pro). Important: Do not order this mount for the Godox AD-B2 Dual Flash Adapter for the AD200, it will not fit. For the AD-B2, select the standard Bowen mount. It is not recommended for other Bowen mount lights because the low-profile design may cause the flange on the insert to contact the frame of the light before it is fully installed into the light. It could become jammed.

CheetahStand Exclusive!

Convert your softboxes to work with your Godox AD600 and AD-B2! IMPORTANT NOTE: Please measure the diameter of your existing speedring insert before ordering. See video for details.

PRODUCT UPDATE! Some of the new Paul C. Buff softboxes are now using a 144mm speedring insert. This insert is the perfect way to adapt those softboxes to work with Bowen S Mount flashes and lights.

This insert allows you to use softboxes that have an interchangeable 144mm (5 11/16") speedring insert with the Godox AD-600B and AD-600BM strobe, the Godox AD-B2 Flash Bracket (which holds two AD200) or our Speed Pro S Bracket. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.

The outer diameter of this ring is 5 11/16" (144mm) so it is designed to fit any interchangeable ring softbox that uses the 5 11/16" insert. Note: This ring does NOT fit any CheetahStand softboxes.

This Low Profile Bowen speedring insert will help you make the most of the light from your flash, especially with the Godox AD600, AD600 Pro, Flashpoint XPLOR 600, XPLOR 600 Pro. It is designed to fit softboxes with interchangeable speedring inserts. This allows you to use your existing softboxes with different lights.

The flash tube on the Godox AD600 and Flashpoint XPLOR 600 sits very close to the head. With a standard Bowen mount, the base of the flash tube is covered by the speedring, which may lower the light output. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.

On the Godox AD600 Pro and Flashpoint XPLOR 600 Pro, the standard speedring can cover a portion of the heat sink. This speedring insert covers much less of the heat sink, allowing more air flow to keep the flash cooler. A cooler flash tube will last longer and produce more consistent light.

Although it was designed for the flashes listed above, it's use is not limited to those flashes. The low-profile insert can be used on most flashes with a Bowen mount to improve the quality of light versus a standard depth Bowen insert.

We carry two other sizes of this speedring insert:
5 1/2" (139mm) - Fits Paul C. Buff softboxes with speedring insert and any other softbox with a 5 1/2" (139mm) speedring insert
6" (152mm) - Fits Cheetah Quick Series and Quick Silver softboxes and any other softbox with a 6" (152mm) speedring insert

Make sure to watch the instructional video below on how to measure your softbox to make sure you order the correct size. The video also shows how to install the insert on your softbox.

Installation Notes: No mounting screws or washers are included. Simply use the screws and washers from your softbox. If any thumbscrews are used in your existing mount, you may need to replace those with a standard phillips head screws because thumbscrews may be too long and won't allow the ring to be fully inserted into the flash.


Average Rating: 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
As advertised, quick delivery April 15, 2019
Reviewer: Anonymous Person from Goleta, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent Products! Excellent Service! December 8, 2018
Reviewer: C.K. from Dallas, TX United States  
"These guys are GREAT!  They are very helpful, very knowledgeable and design fantastic light modifiers and photographic equipment.  The   Low Profile Bowen Speed Ring Insert allows the bulb in my Xplor 600 to extend farther out into the modifier than the speed ring it came with.  I will purchase one for every modifier i obtain."

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Low profile won't fit the Aputure 120d November 11, 2018
Reviewer: Steve from Canada  
"Good product, well made. The downside with the low profile is that the lugs don't sit deep enough in the mount on the Aputure 120d to allow it to rotate into position and lock. Removed about 3mm from the 'inside' of the lugs (closest to the flange) and now it will rotate and engage."

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Speed Ring June 22, 2018
Reviewer: Robert Martin from Murfreesboro, TN United States  
"The Speed Ring worked perfectly.  Fast shipment"

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
A nice solution May 29, 2018
Reviewer: Russ from Point Roberts, WA United States  
"I personally find the low profile Bowens mount much more useful than just the AD600 that it's designed for.  I use it with speedlights and an S-Type bracket."

Was this review helpful to you?

View All Customer Reviews