Home > Accessories >

Low Profile Bowen Speed Ring Insert (All Versions)
Low Profile Bowen Speed Ring Insert (All Versions)


 
Alternative Views:


Regular Price: $29.95
Sale Price: $24.95
You Save: $5.00


Product Code: SRI-BLP

Select Insert Size

5 1/2" (139mm)
5 2/3" (144mm)
6" (152mm)

Qty:  
Description
 


CheetahStand Exclusive!

This Low Profile Bowen speedring insert will help you make the most of the light from your flash, especially with the Godox AD600, AD600 Pro, Flashpoint XPLOR 600, XPLOR 600 Pro and Godox AD-B2. It is designed to fit softboxes with interchangeable speedring inserts. This allows you to use your existing softboxes with different lights.

The flash tube on the Godox AD600, AD-B2 and Flashpoint XPLOR 600 sits very close to the head. With a standard Bowen mount, the base of the flash tube is covered by the speedring, which may lower the light output. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.

On the Godox AD600 Pro and Flashpoint XPLOR 600 Pro, the standard speedring can cover a portion of the heat sink. This speedring insert covers much less of the heat sink, allowing more air flow to keep the flash cooler. A cooler flash tube will last longer and produce more consistent light.

Although it was designed for the flashes listed above, it's use is not limited to those flashes. The low-profile insert can be used on most flashes with a Bowen mount to improve the quality of light versus a standard depth Bowen insert.

This mount comes in three different styles:
5 1/2" (139mm) - Fits Paul C. Buff softboxes with speedring insert and any other softbox with a 5 1/2" (139mm) speedring insert
5 2/3" (144mm) - Fits Jinbei softboxes and any other softbox with a 5 2/3" (144mm) speedring insert
6" (152mm) - Fits Cheetah Quick Series and Quick Silver softboxes and any other softbox with a 6" (152mm) speedring insert

Make sure to watch the instructional video below on how to measure your softbox to make sure you order the correct size. The video also shows how to install the insert on your softbox.

Please note this Bowen mount will not work with Aputure LED light.
CheetahStand Exclusive Low Profile Bowen Speedring Insert
5 1/2" (139mm)

Average Rating: 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
Excellent Products! Excellent Service! December 8, 2018
Reviewer: C.K. from Dallas, TX United States  
These guys are GREAT!  They are very helpful, very knowledgeable and design fantastic light modifiers and photographic equipment.  The   Low Profile Bowen Speed Ring Insert allows the bulb in my Xplor 600 to extend farther out into the modifier than the speed ring it came with.  I will purchase one for every modifier i obtain.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Low profile won't fit the Aputure 120d November 11, 2018
Reviewer: Steve from Canada  
Good product, well made. The downside with the low profile is that the lugs don't sit deep enough in the mount on the Aputure 120d to allow it to rotate into position and lock. Removed about 3mm from the 'inside' of the lugs (closest to the flange) and now it will rotate and engage.

Cheetah Reply:

We have Note on Product Description:          
#####Please note this Bowen mount will not work with Aputure LED light.#####

Edward Tang
Cheetahstand.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Speed Ring June 22, 2018
Reviewer: Robert Martin from Murfreesboro, TN United States  
The Speed Ring worked perfectly.  Fast shipment
Good job

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
A nice solution May 29, 2018
Reviewer: Russ from Point Roberts, WA United States  
I personally find the low profile Bowens mount much more useful than just the AD600 that it's designed for.  I use it with speedlights and an S-Type bracket.

I know it's not recommended for that, and that with some softboxes you might have to change the thumbnail screw orientation (see the Cheetah videos on that), but still...

It lets me get the head of the speedlight clearly into the softbox area, and not recessed back in the Bowens mount area.   Caution, every speedlight flash and softbox is different, so YMMV...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Low profile Bowen speed ring insert April 25, 2018
Reviewer: Strobo from BC  
Great product. I measured the output with a few different modifiers and there was an increase in every one tested, from about a third to just under half a stop. An added benefit is more even light distribution. I highly recommended these for anyone with Bowens mount strobes that wants to get the most out of their strobes.

The customer service from Cheetahstand is exceptional, far above most others in the industry. The shipping is quite fast too.

I'm pleased with not just the product but the whole "low friction" sales experience. I'll be buying more stuff from them in the future and will be recommending them to others.

Was this review helpful to you?